Productdetails:
Betalen & Verzenden Algemene voorwaarden:
|
Gebruik: | Proces testen Machine | Het systeem: | Chinese, Engelse Facultatief |
---|---|---|---|
VERRICHTING: | LCD of PC | OEM Orde: | Aanvaardbaar |
Milieuvereiste: | 5~30℃, stabiele tochtige vloer, geen hitte bronstraling | Pijp Qty: | 1681-2601 PCs |
Temperaturwaaier: | -20~150℃ \ -30~150℃ \ -40~150℃ \ -50~150℃ \ - 60~150℃ \ -70~150℃ | Het verwarmen tijd: | Maximum snelste (zonder commissie) 20℃/min |
Verschijning: | wals staalplaten, Hoek cirkelboog koud | koelende vloeistof: | R23 \ R404A |
Hoog licht: | Milieu-testapparatuur,Thermische schok testkamer |
LCD or PC Control Temperature and Humidity Control System WIth cold-roll steel sheets, Corner circular arc
Design Standards:
1. GB/T2423.22-2002
2. IEC 60068-2-14:1984
3. GB/T2423.1-2001 (IEC 60068-2-1:1990)
4. GB/T2423.2-2001 (IEC 60068-2-2:1974)
5. GB/T2423.13-2002 (IEC 60068-2-33:1971)
6. IEC600682-33:1997
7. GB/T 2424.13-2002/IEC60068-2-33:1971
Use:
This faster temperature (& humidity) chamber enables the application of high
Stress to the specimen at a steep temperature change rate of 5℃/min. or more. A temperature change rate of 5℃ /min. or more has been achieved from -75℃⇔+150℃, and from -18℃⇔+158℃, thanks to the larger refrigeration systems in this mode.It consists of cooling system,heating system,controlling system,air cycle system,sensor system.
Used in equipments, chemistry,plastic rubber, electron,food,frabic,metal, aerospace industry.Simulate the temperature fast temperature changing condition,to check the product performance if changed in this condition.
Specification:
Model | 80L | 150L | 225L | 408L | 500L | 1000L | ||
Inner size (mm) |
Deep | 400 | 500 | 500 | 600 | 700 | 1000 | |
Width | 400 | 500 | 600 | 800 | 800 | 1000 | ||
Height | 500 | 600 | 750 | 850 | 900 | 1000 | ||
Environment Requirement | 5~30℃,stable floor, draughty,no heat source radiation | |||||||
performance parameter | Temperatur range | -20~150℃ -30~150℃ -40~150℃ -50~150℃ -60~150℃ -70~150℃ | ||||||
Temperature uniformity | ±1.0℃ | |||||||
Temperature fluctuation | ±0.5℃ | |||||||
Heating Time | Max fastest 20℃/min(no-load) | |||||||
Cooling Time | 3℃/min,5℃/min,10℃/min,15℃/min(no-load) | |||||||
Appearance | cold-roll steel sheets, Corner circular arc | |||||||
Material | antirust | Good antirust function | ||||||
Inner container | SUS304/2B steel plates,inner containers designed by arc | |||||||
thermal insulation material | superfine glass heat preservation cotton or polyurethane foaming | |||||||
Motor heat dissipation | Chamber is deeper,with aerofoil fan, improve the motor heat dissipation | |||||||
Heater | stainless steel Fins heating element | |||||||
Observe Window | conducting film electric heating | |||||||
seal washer | Silica, sealing strips | |||||||
pressure fan | centrifugal impeller | |||||||
Cooling System | Compressor | France Taikang | ||||||
refrigeration | Mechanical compress single stage/ Cascade refrigeration,water refrigeration; | |||||||
condenser | Fins radiator,long-lived outer rotor motor | |||||||
refrigerating fluid | R23R404A | |||||||
configuration | Imported refrigeration configuration | |||||||
Controller | Programmable controller,7.2 inch LCD touched display,Chinese English menu,PID Seting,record automatically,support connecting computer by USB. | |||||||
Safety | earth leakage protection,motor overcurrent protection,compresor overpressure protection,high temperature protection...... | |||||||
configuration | Sample shelf,1pcs, ф50mm wire hole,1 pcs, floodlight 1pcs |
Excellent after sale service:
1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.
Pictures:
Contactpersoon: Miss. Silivia Zhang
Tel.: 86-13925519875
Fax: 86-0769-28638013
0.5~500mm/min 40*40*70cm High-low Temperatuur Trekkamer met ISO, Ce-Certificatie
Dubbel Vloertype van het Kolom Elektronisch Universeel Trekmeetapparaat voor Verlenging
Verpakkingsmateriaal Universeel Trekmeetapparaat dat voor het Verzegelen Verlenging wordt ontworpen
20Ton 750mm Universeel Materieel Meetapparaat, Hydraulisch de Treksterktemateriaal van UTM
1 Norm van de de Adhesietest FINAT van de rol2kg de Elektronische Astm Band
KEJIAN-van de het Meetapparaatbal van de Bandadhesie van de de Balkopspijker Rolling de Testmachine
Van de de Schilkracht van ASTM D2979 de Testmateriaal, 0-100N de Testmachine van de 90 Graadschil
De Kamers die van de milieutest Testkamer verouderen Plastic plaat UV het verouderen meetapparaat